Uniden UBCD436-PT Owner'S Manual Download Page 84

Page: 84 / 108

Weather Scan

Press

Channel

to hold on any channel/frequency. Press

Func

then press and hold

6(WX)

You can also start Weather Scan from the WX Operation menu.

The scanner starts scanning the preprogrammed weather frequencies and stops on the first good

signal. If the signal is lost, the scanner resumes searching for another weather transmission.

Note: Weather Alert and SAME Weather alert do not function in Weather Scan.

Change Channel

Turn the

Scroll Control

Attenuation

Press

Func

then

4(ATT)

Intermediate Frequency Exchange

Press

Channel

to hold on any frequency. Press

Func

then

7(IFX)

to toggle on or off.

Replay the Last Transmissions

Recording starts when the scanner receives an Alert in Weather Alert.

Press

Replay

Press

Channel

to pause/resume replay.

Turn the

Scroll Control

to select recordings.

Quick Search

Press

Func

then

E/yes

to start Quick Search at the current frequency.

Weather Menu

Press

Func

then

Menu

WEATHER ALERT

This setting turns on weather alert and determines which types of signals will trigger an alert. See

also Program SAME, page 73.
Press

Channel

to hold on any channel/frequency.

Press

Func

and then press and hold

6(WX)

. Press

Func

then

Menu

Scroll to

Weather Alert

and press

E/yes

Alert Only

- The scanner will scan all the weather channels and immediately sound a

weather alert siren when it detects the 1050 Hz weather alert tone. Press any key to stop the

siren which opens the squelch and the scanner remains on the weather channel.

SAME 0-4

- The scanner sounds a weather alert siren for any programmed countries. The

scanner displays warning level as “

Warning WX

”, “

Watch WX

” or “

Advisory WX

” and it

displays decoded Event Code.
When an alert is received, press any key to listen to the alert.

Summary of Contents for UBCD436-PT













































































































Search results

Summary of Contents for UBCD436-PT

Reviews:

Related manuals for UBCD436-PT

Brands by name

Popular brands

Uniden UBCD436-PT, Owner'S Manual

Search results

Summary of Contents for UBCD436-PT

Reviews:

Related manuals for UBCD436-PT

Brands by name

Popular brands