Uniden UBCD436-PT, Owner'S Manual

Page: 82 / 108

72
View Repeater Frequency
Press Channel to hold on any frequency.
Press Func then press and hold 8(REV) .
Replay the Last Transmissions
Press
Replay
.
Turn the Scroll Control to select recordings.
Press Channel to pause/resume replay.
Note: Replay is not available when recording is enabled. See also Replay Options
,
page 31 .
Start/Stop Recording
Press Func then Replay .
Note: Resets to Off when you turn off the scanner.
Storing
Displayed Frequency into a Quick Save Department. Press E/yes .
You will see Saving to Quick Save Department in the display then press E/yes .
The scanner stores the frequency into the
Quick Save Department
.
Displayed Frequency into an Existing Department Press E/yes .
You will see Saving to Quick Save Department in the display, then press ./no .
At
Select Department
, scroll to the department where you want to store the frequency and
press E/yes .
After storing the frequency, you will be at the Edit Channel menu to complete the settings
for the new channel.
If you don’t want to edit the channel settings or are done editing the channel, press
Avoid
to return to searching.
Quick Search at Current Frequency
Press Channel to hold on the frequency.
Press Func then E/yes . At Quick Search? , press E/yes .
Press Channel again to release Hold mode and start searching.
Weather Alert Priority Mode
Press Func then 6(WX) to toggle on or off.
Close Call Menu
Press Func then Menu .
WEATHER OPERATION
WEATHER OPTIONS
Press
Menu
. Scroll to WX Operation and press
E/yes
.
Scroll to the options below and press
E/yes
.