Uniden UBCD436-PT, Owner'S Manual

Page: 86 / 108

76
Review WX Alerts
Replay and review WX/SAME alert event results. The scanner drops these alert events after
the alert time expires.
Weather alerts are always recorded and you can review the alerts in the WX Operations
menu by scrolling to Review WX Alerts.
fIRE TONE-OUT
Fire Tone-Out will monitor up to 32 different channels for paging tones (two-tone sequential, single
tone, and group tone).
Tone-Out Standby Mode
is used if you use programmed tones.
Tone-Out Search Mode
is used if you don’t know the tones.
All tone-outs (channels) that have the same frequency (and modulation and attenuation) as the
one you select will also (and only) be monitored so you can monitor up to 32 tone-out channels for
one frequency.
In this case, the scanner displays each tone-out channel for two seconds. It does not scan them;
tone-out monitors the frequency for all tone-out channels with the same frequency.
Regardless of the current display, the scanner will alert on any received tone out that matches a
stored setting (channel) for the frequency.
Note: Tone-Out Search Mode will not display each Tone-Out channel for two seconds, even
when multiple channels have the same frequency, modulation and attenuator settings with
other channels.
TONE-OUT SETUP
Press
Menu
. Scroll to
Tone-Out for...
and press
E/yes
.
Scroll to
Tone-Out Setup
and press
E/yes
.
Scroll to
Tone-Out (0-31)
and press
E/yes
.
Note: Close Call DND/Pri and Weather Alert Priority do not operate in this mode.