Uniden UBCD436-PT, Owner'S Manual

Page: 41 / 108

31
Band Defaults
Use this menu to change the default modulation and frequency step or spacing used for each
band. See also Default Band Coverage, page 81.
Scroll to each band you wish to edit and press
E/yes .
Set Modulation
AM, NFM, FM, WFM, or FMB (Broadcast).
Set Step
5, 6.25, 7.5, 8.33, 10, 12.5, 15, 20, 25, 50, or 100 kHz.
Auto Shutoff
Allows you to set the scanner to shut off after a set time.
Off, 5, 10, 15, 30, 45 min, 1, 2, 3 hours.
Set Clock
Sets the clock for the display and the default tag for recordings.
Set Date
Set Year. Enter the year (2013-2099).
Set Month. Enter the month.
Set Day. Enter the day.
Set Time
Set Hour. Enter the Hour (0-23).
Set Minute.
Enter the minute.
Set Time Zone
Scroll to your time zone.
Replay Options
This allows you to set the recording duration and delete, replay, or rename recording sessions.
Set Replay Duration
30, 60, 90, 120, 150, 180, 210, or 240 sec.
Review Recordings
Recording Session
Play Session .
Turn the Scroll Control to select recordings.
Press
Channel to pause/resume replay. Press Replay to exit.
Delete Session
At Confirm Delete? Press
E/yes
or
./no
.
Rename Session. See Data Naming, page 25.
PC Programming Mode
Select PC Programming Mode. The Unit reboot and go into PC Programming mode.
* Connect to PC by USB cable before setting. If UCB cable is not connected a error message
comes on LCD, and stay in menu.
**The unit comes back to normal mode after disconnect PC.
WARNING! While PC mode, Unit power is supplied via USB but its won’t charge to the
installed batteries.