69
Hits with Scan
Set Alert Tone
Set CC Mode
Set Alert Light
Set CC Bands
Set CC Pause
Close Call Only
This setting puts the scanner in Close Call Only mode.
See also Using Close Call, page 70.
You can also toggle these modes by:
UBCD436-PT: Holding on any channel and pressing
Func
then
Avoid
(
).
UBCD536-PT: Pressing
SQ
(
).
Hits with Scan
This is a special system that automatically stores the last 10 close call hits and allows you to scan
them. Accessible only in the Close Call menu, the system has to be Unavoided to view while
scanning (default is Permanent Avoid). The scanner will delete the frequencies in this system
when you turn the power off.
Set Avoid
Stop Avoiding, Temporary, or Permanent Avoid
Set Hold Time.
Sets how long to search when scanning.
Enter the hold time (0-255 sec.) and press
E/yes
to save.
Set CC Mode
Selects the Close Call mode when scanning or searching.
Off.
Close Call is turned off.
CC DND.
Close Call checks for frequencies every two seconds when the scanner is not
receiving a transmission.
CC Priority.
Close Call checks for frequencies every two seconds.
You can also toggle these modes by:
(UBCD536-PT) Pressing
SQ
(
).
(UBCD436-PT) Holding on any channel and pressing
Func
then
Avoid (
)
.
Set CC Bands
Lets you select the Close Call bands to be searched.
Scroll to each
Band
and press
E/yes
to toggle
On
or
Off
.
Press
Menu
to return.
vHf Low 1
- 25-54 Mhz
vHf High2
- 225-320 Mhz
vHf Low 2
- 54-108 Mhz
UHf
- 320-512 Mhz
Air Band
- 108-137 Mhz
- 758-960, 1240-1300 Mhz
vHf High1
- 137-225 Mhz
(Cellular frequencies not scanned)
Set CC Alert
This allows you to set an Alert Tone, Alert Light, and sets the Pause time for Close Call when you
receive a hit.
Summary of Contents for UBCD436-PT
Page 10: ......
Page 105: ...95 ...
Page 106: ...96 ...
Page 108: ... 2015 Uniden Australia Pty Ltd Printed in Vietnam U01UB376AZA ...