Uniden UBCD436-PT, Owner'S Manual

Page: 27 / 108

17
UPdATING THE dATABASE
1. To update the scanner’s database, connect it to your PC using the supplied USB cable.
Select Mass Storage .
2. Next, in Sentinel, select UPDATE/Update Master HPDB .
3. Finally, write the new database to your scanner by selecting Scanner/Write to Scanner .
SETTING UP YOUR SCANNER
TURN ON THE SCANNER
uBCd436-PT
For Model Number Procedure
uBCd436-PT
1. Press and hold for about 2 seconds.
2. If the screen is too dark, tap to turn on the backlight.
3. Press the scroll control to display the volume level. Turn the
scroll control (within 3 seconds) to adjust the volume.
4. Press the scroll control again to close the volume level (or let
it disappear after 10 seconds).
5. Press Func then press the scroll control to display the
squelch level. Turn the scroll control counter-clockwise all
the way then clockwise until the noise stops, then one notch
more.
6. Press the scroll control again to close the squelch level.
uBCd536-PT
1. Rotate
VOL
clockwise and set the volume to around 10
o’clock.
2. Rotate the SQ knob counter-clockwise all the way, and then
rotate the
VOL
knob to find a comfortable volume level.
Rotate the SQ clockwise until the noise stops, then one
notch more.
The first time you turn on your scanner it will prompt you to set the clock. See
Set Clock, page 31
.
To begin scanning right away, press the Zip button to select your country and zip/postal code (See
Data Naming, page 25, to enter postcode). The scanner will load channels for your area from
the database and start scanning.
uBCd536-PT