Uniden UBCD436-PT Owner'S Manual Download

Page: 11 / 108

IMPORTANT INfORMATION

THE fCC WANTS YOU TO KNOW

IMPORTANT!

This scanning radio has been manufactured so that it will not tune to the radio

frequencies assigned by the FCC for cellular telephone usage. The Electronic Communications

Privacy Act of 1986, as amended, makes it a federal crime to intentionally intercept cellular or

cordless telephone transmissions or to market this radio when altered to receive them. The

installation, possession, or use of this scanning radio in a motor vehicle may be prohibited,

regulated, or require a permit in certain states, cities, and/or local jurisdictions. Your local law

enforcement officials should be able to provide you with information regarding the laws in your

community.

Caution - FCC RF Exposure Requirements

Transmitter operating conditions: The antenna(s) used for this transmitter must be

installed to provide a separation distance of at least 7.8 in. (20 cm) from all persons

and must not be collocated or operating in conjunction with any other antenna or

transmitter

MOdIfICATION NOTICE

Changes or modifications to this product not expressly approved by Uniden, or operation of this

product in any way other than as detailed by this Users Guide, could void your authority to operate

this product.

PART 15 INfORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

•

Consult the dealer or an experienced radio/TV technician for help.

NOTE

Parts of this manual which relate to features and/or functions of the UBCD436-PT

which are not available for Australia/New Zealand have been shaded out.

Summary of Contents for UBCD436-PT













































































































Search results

Summary of Contents for UBCD436-PT

Reviews:

Related manuals for UBCD436-PT

Brands by name

Popular brands

Uniden UBCD436-PT, Owner'S Manual

Search results

Summary of Contents for UBCD436-PT

Reviews:

Related manuals for UBCD436-PT

Brands by name

Popular brands