24
Set Up GPS
– Sets the location format, serial port baud rate, and units.
Location Format
DMS:DDD˚MM’SS.ss or DEG:DDD.dddddd.
Set Serial Port.
Default is 4800 bps for GPS device.
Off, 4800, 9600, 19200, 38400, 57600, or 115200 bps.
Set Range
– This setting allows you override the default range setting for your current location
to increase or decrease the number of Trunking Sites and Channel Departments you can receive
when you are scanning from the Full Database and
when you are scanning Favorites Lists with
Location Control enabled. See also Understanding Range, page 24.
Enter the range (0-50) and press
E/yes
.
Note: (UBCD536-PT Only) You can also press
RANG
to enter your range.
Edit Location
– This allows you to create a location or edit a location for rapid recall.
New Location or Edit Location
Edit Name.
See Data Naming, page 25.
Use Location.
This will set the location as current for scanning
the Database and
Favorites Lists with Location Control enabled.
At Confirm? Press
E/yes
or
./no
.
Delete Location.
You can only delete saved locations.
The last location set will be
retained for use when scanning the Database.
At
Confirm Delete?, p
ress
E/yes
or
./no
.
Set Location Information.
See Set Manual Location, page 23.
Set Range.
Enter the range (0-50) and press
E/yes
.
Save Location
– This will save the current location,
the range, and set the location as current for
scanning the Database and Favorites Lists with Location Control enabled.
See Data Naming, page 25, to name the location.
UNdERSTANdING RANGE
1.
The range setting will only work with Favorites Lists that have Location Control set to On and
with Departments/Sites that have locations programmed.
Everything in the Full Database
also has locations programmed.
If you manually program Departments/Sites with no location
information included, the range setting will have no effect on them because the scanner
doesn’t know where they are.
2.
You will receive Departments/Sites that have a range equal to your scan range setting plus
the programmed range of the Departments and Sites. For example, if your scan range is set
to 10 miles and a Department/Site range is set to 30 miles, and that Department/Site is less
than 40 miles away from your current location setting, it will be enabled in your Favorites List
according to both range settings.
3.
If you use Add Current dB Channels from a list with a 10 mile range (selected location by
zip/postal code) and then set the range to 20 miles, Location Control will not add the other
channels included that extra 10 mile range.
SELECTING SERvICE TYPES
Not all service types are enabled when you set your location in the scanner. By default only EMS
Dispatch, Fire Dispatch, Law Dispatch, Custom 1, and Multi-Dispatch are enabled.
Summary of Contents for UBCD436-PT
Page 10: ......
Page 105: ...95 ...
Page 106: ...96 ...
Page 108: ... 2015 Uniden Australia Pty Ltd Printed in Vietnam U01UB376AZA ...
