Uniden UBCD436-PT, Owner'S Manual

Page: 44 / 108

34
NUMBER TAGS
Numbers tags will allow you to tag each Favorites List, System, and Channel to locate easier.
Number tags can range from 0 to 99 for Favorites Lists and Systems and 0-999 for Channels.
You can assign number tags to channels even if the Favorites List does not have a number tag
but, without a Favorites List number tag, you can only navigate to these channels while holding or
scanning in that Favorites List. See also Using Number Tags, page 56.
ALERTS
You can program your scanner to alert you when, a Channel or Unit ID is received, you receive
a Close Call hit, an ID is transmitted with an Emergency Alert or you receive a Tone-out hit. For
each alert in the scanner, you can select from 9 different tone patterns, 15 volume settings, 7
colors, and 3 flash patterns.
MANAGING fAvORITES LISTS
Favorites Lists hold all your Systems, Sites, Departments, and Channels. You should assign a
Quick Key to every Favorites List to quickly enable or disable the list. You can assign a Favorites
List to a Favorites List Quick Key.
NEW fAvORITES LIST/ fAvORITES LIST OPTIONS
Press Menu then scroll to Manage Favorites and press E/yes .
To Create a New Favorites List, scroll to New Favorites List and press E/yes .
To Edit a Favorites List, scroll to the Favorites List and press E/yes .
Scroll to the options below and press E/yes . (Reformatted table below)
Review/Edit System Use Location Control Rename
Set fL Quick Key Review Avoids delete
Set fL Number Tag Stop All Avoiding Information
Set fL Startup Key Add Current dB Channels
Review/Edit System – See Programming Systems, page 36.
Set FL Quick Key – This assigns a quick key to the Favorites List and will scan the list when the
key is enabled. The default setting is . (no quick key). If you don’t assign a Favorite Lists to a quick
key, it will always be scanned unless you turn it off in Select Lists to Monitor. See also Set Scan
Selection, page 47.
Scroll to the quick key number (0-99 or . for no quick key) and press E/yes to save.
Note: Pressing the first number of a 2-digit quick key will get you closer, 1 for 10, 2 for 20,
etc., then scroll to second digit.
Set FL Number Tag – This allows you to number a Favorites List so you can access it quickly
from scan hold mode. See also Using Number Tags, page 56.
The default setting is no number tag.
Enter the number tag (0-99) and press E/yes to save. Enter a blank for no number tag.
Set FL Startup Key – This allows you to turn on the scanner with the Favorites List enabled for
scan. The default settings are all keys Off.