11
vEHICLE INSTALLATION
You can mount your scanner in your vehicle, using either the supplied bracket or the optional
DIN-E sleeve.
If the scanner loses power (as when you turn off your car’s ignition with the scanners power switch
on), it can corrupt the microSD card. To ensure that does not happen, turn off the scanner before
turning the car’s ignition off.
WARNING! AVOID AIRBAG DEPLOYMENT ZONES.
Ignoring this installation concern may result in bodily harm and the inability of the
airbag to perform properly.
Mounting Using the Bracket
With the bracket removed from the radio, use the holes in the bracket as a template to initially
mark the location you plan to use in your vehicle. Be absolutely certain of what might be behind
the mounting surface before making any holes, be it above, or below, or in front of your dash,
armrest console, or other location. If you drill carelessly, expensive damage can result. If in doubt,
consult your vehicle dealer’s service department or a qualified professional installer.
1.
Using appropriate screws or other hardware, secure the bracket.
2.
Insert the scanner and insert the bracket knobs to lock the scanner in position.
3.
Attach the Cigarette Lighter Power Cord to the rear of the scanner and plug the adapter end
into a dash mounted 12V DC socket.
4.
Attach a suitable mounted mobile antenna to the antenna jack on the back of the scanner.
Summary of Contents for UBCD436-PT
Page 10: ......
Page 105: ...95 ...
Page 106: ...96 ...
Page 108: ... 2015 Uniden Australia Pty Ltd Printed in Vietnam U01UB376AZA ...