49
Caution: If you press the wrong key when you press the power key to set your startup
configuration, and that wrong key doesn’t have any Favorites Lists assigned to that
key, you will start up your scanner with all systems Avoided-Nothing to Scan.
PRIORITY SCANNING
Priority Scan
– When the scanner is scanning a Conventional System, it interrupts scanning,
based on the Priority Interval and Max Channels settings, to check priority channels for activity.
The more channels you have set to priority, the longer the interruption will be. The Favorites
List(s) and System(s) containing the priority channel(s) have to be enabled (and not Avoided) or
the scanner will display
Priority Scan No Channel
.
Priority DND
– The scanner checks priority channels, based on the Priority Interval and Max
Channels settings, only when not receiving other conventional channels so there is no interruption
in scanning with conventional systems.
Priority ID Scan
– This function is similar to conventional priority although there is no interruption
during the transmission. Priority is checked in between transmissions, when the scanner is
receiving the control channel, and during the channel delay period. The scanner can only look for
priority IDs in the trunked system it is currently scanning.
Preemptive Priority ID Scanning
– For Motorola systems that have channel priority active on the
system, if you flag a channel as priority and the system also has that TGID identified as a priority
channel, the scanner will preempt any current transmission if the TGID becomes active.
The highest priority is for channels in System Quick Key 0. The lowest priority is for channels in
System Quick Key 99. Priority for priority channels in the same channel Department follows the
order in which the channels were created.
To use Priority Scan,
you must first set your Priority Channels.
To use Priority ID Scan,
you must also enable Priority ID Scan for each system.
To Toggle Priority Modes
,
press
Func
then
./no(Pri)
.
Note: Priority is always on for a trunked system if enabled.
PRIORITY SCAN OPTIONS
Press
Menu
then scroll to
Priority Scan
and press
E/yes
.
Set Priority
Set Interval
MaxChannels/Pri-Scan
Set Priority
– Sets the Priority
mode
. You can also toggle these modes by holding on any channel
in scan mode and pressing
Func
then
./no(Pri)
.
Off
- The Priority feature is off.
Priority DND
- The scanner checks Priority channels only when not receiving other
conventional channels.
PRI
appears in the display reversed -
.
Priority Scan
- The scanner checks conventional priority channels.
PRI
appears in the display -
.
Set Interval
– This sets (in seconds) how often the scanner will check the priority channels.
1-10
sec.
MaxChannels/Pri-Scan
– This sets the maximum number of priority channels that are scanned
during one priority scan interrupt. If there are more priority channels than the value you select,
Summary of Contents for UBCD436-PT
Page 10: ......
Page 105: ...95 ...
Page 106: ...96 ...
Page 108: ... 2015 Uniden Australia Pty Ltd Printed in Vietnam U01UB376AZA ...