Ulvac GI-M2, Instruction Manual

Page: 36 / 101

30
8.7. Selection of Range Changeover Function
→
Refer to
Ｐ．
38
Setting of range changeover function.
ｒＡｎ：１ ⇒ ＡＵＴＯ ＲＡＮＧＥ
MODE
ｒＡｎ：２ ⇒ ＲＡＮＧＥ ＨＯＬＤ
MODE
ＲＡＮ－①
The
○
portion in the left figure blinks
after the segment indicator displays [
ｒ
Ａｎ ＿＿
] for about 1 second. Each
time the [
∆
] is pressed, the
○
portion in
the left figure displays [
ｒＡｎ ＿１
]
⇔
[
ｒＡｎ ＿２
] cyclically.
To use range AUTO(HOLD), press the
[
⇒
(ENTER)] key with[
ｒＡｎ ＿
1
] [
ｒＡ
ｎ ＿２
] selected, to transfer control to
the DGS-
①
status.
8.8.
Setting of Range HOLD
→
Refer to
Ｐ．
38
Setting of range HOLD. The set point as follows.
GI-M2 GI-D7 GI-N8
Setting
range
－０ ～ －８ －１ ～ －７ －１ ～ －９
ＲＡＮ－②
Each time the [
∆
] key is pressed, the
numeric value of the blinking portion
changes. When a desired numeric
value is displayed, press the [
⇒
(ENTER)] key to transfer control to the
DGS-
①
status.