UDO Super Gemini — Owner’s Manual
16
Performances
A performance comprises a complete instrument setup, consisting of
two layers – an upper and a lower layer – each with its own patch (see
pages 19-24) and overarching parameter settings (see pages 78-82).
A performance is always loaded because it provides the framework for
individual sounds or patches. It can consist of one patch in single mode,
two stacked patches in dual mode, or two patches assigned to the left
and right halves of the keyboard in split mode. See pages 81-82 for more
details on each of these modes.
The MASTER VOLUME setting is not part of a performance and
must always be adjusted manually.
A total of 128 performances are accessible from the front panel. They
are organised in two groups (
A
and
B
) of 8 banks (
A
-
H
) featuring 8
performances each. You can edit these or use the dedicated memory slots
to store your own performances.
Loading a Performance
First of all, make sure you are in performance mode. The Super Gemini
defaults to this mode when you turn it on, but otherwise it is activated by
pressing the button labelled
PERF
.
The performance mode button.
Pressing
PERF
gives you access to group
A
, indicated by the lit LED
above the letter
A
. To access the performances of group
B
, hold
SHIFT
and then press
PERF
. The LED above the letter
B
will now light up.
Each lettered button (
A
–
H
) allows you to select a bank. Pressing a
numbered button (
1
-
8
) loads one of eight performances within a selected
bank.
Summary of Contents for SUPER GEMINI
Page 136: ......