UDO Super Gemini — Owner’s Manual
33
The LEDs of buttons
W1
-
W16
indicate which waveform is loaded, while
the two LEDs of the
WAVE
button indicate which channel it is assigned to.
In the first example, waveform 6
is loaded and assigned to channel
A
:
In the second example, waveform
25
is loaded and assigned to channel
B
:
To load alternative waveforms:
1. Press
WAVE
or move the DDS 1 waveform rotary switch to the
rightmost position. LED
A
will light up, indicating that you are now
in wave selection mode for channel
A
.
2. Play some notes and press one of the select buttons (
W1
-
W16
)
once or twice to load the waveform you would like to assign to
channel
A
.
3. Press
WAVE
again. LED
B
will light up, indicating that you are now
in wave selection mode for channel
B
.
4. Play some notes and press one of the select buttons (
W1
-
W16
)
once or twice to load the waveform you would like to assign to
channel
B
.
5. Press the
PATCH
button to exit wave mode.
Each patch remembers the alternative waveforms it was saved with.
Even if you replaced all alternative waveforms the Super Gemini is
shipped with, the factory patches wouldn’t change.
When you switch from patch to manual mode, the alternative
waveforms from the previously loaded patch will be retained for
DDS 1.
Summary of Contents for SUPER GEMINI
Page 136: ......
