UDO Super Gemini — Owner’s Manual
79
When the Super Gemini is synchronised to an external MIDI clock
source, the TEMPO control has no effect. In this case, use the CLK
DIV control in the arpeggiator and sequencer section to set the
playback speed in clock divisions relative to the external tempo.
Detune
This parameter is only available for the lower layer. It allows you to either
slightly detune the lower layer relative to the upper layer to thicken a dual
mode performance, or detune an entire performance to compensate
for pitch offsets caused by cross modulation. Its setting is stored with a
performance.
The lower layer detune control.
DETUNE: This control determines the fine-tune setting for the lower layer.
Turning the control clockwise increases the frequency. Turning the control
counter-clockwise decreases the frequency. You can adjust the fine-tuning
over a range of +/- 7 semitones.
PERF DETUNE:
In shift mode, the
DETUNE
control allows you to detune
a performance. Turning the control clockwise increases the frequency.
Turning the control counter-clockwise decreases the frequency. You can
adjust the tuning over a range of +/- 7 semitones.
Summary of Contents for SUPER GEMINI
Page 136: ......
