UDO Super Gemini — Owner’s Manual
76
RIBBON CONTROLLER
In addition to its polyphonic aftertouch keyboard, the Super Gemini is also
equipped with a custom-designed ribbon controller to further increase the
expressiveness of your performance. By default, the ribbon controller is
mapped to control the pitch of the oscillators. The scope of the pitch-bend
range depends on your finger position:
•
To achieve the maximum range of a pitch bend upwards, place your
finger at the bottom of the ribbon controller and slide it to the top.
•
To achieve the maximum range of a pitch bend downwards, place
your finger at the top of the ribbon controller and slide it down.
The ribbon controller.
Pitch bends controlled by the ribbon controller only affect notes
held on the keyboard. During the release stage of the envelopes, the
ribbon controller no longer affects the pitch of the notes.
You can also map the ribbon controller to various modulation destinations
using the modulation matrix. See pages 83-88 for more information on
how to use the modulation matrix.
The ribbon controller as a modulation source in the modulation matrix.
When you assign the ribbon controller to any modulation destination
using the modulation matrix, the ribbon controller no longer controls
the pitch of the oscillators. If you clear all modulation mappings
to the ribbon controller as a modulation source in the modulation
matrix (see page 88), pitch control is enabled again.
Summary of Contents for SUPER GEMINI
Page 136: ......
