UDO Super Gemini — Owner’s Manual
91
ARPEGGIATOR & SEQUENCER
The Super Gemini features a flexible arpeggiator as well as a simple
yet powerful 64-step sequencer. By combining different arpeggios and
sequences in dual or split mode, you can create complex rhythm patterns.
The arpeggiator and sequencer section.
Clock Parameters
CLK DIV:
This control allows you to set the playback speed in clock
divisions relative to the tempo set with the
TEMPO
control on the left side
of the front panel or an external MIDI clock source. The currently selected
clock division, for example quarter notes, eighth notes or quarter note
triplets, is indicated by a lit LED. Pressing the
CLK DIV
encoder resets the
clock division to 1/16.
SYNC:
With this option enabled, the rate of LFO 1 and the delay time will
be synchronised to the playback speed of the arpeggiator or sequencer as
set by the
TEMPO
control or an external clock source. You can then use
the
RATE
fader in the LFO 1 sections and the
TIME
control in the delay
section to adjust the corresponding parameter values in clock divisions. If
this option is disabled, LFO 1 and the delay time will be free-running.
EXT CLK:
Press
SHIFT
and then the
SYNC
button to enter the external
clock settings. When the arpeggiator or sequencer is synchronised to an
external MIDI clock source, you can use the
CLK DIV
control to set the
playback speed in clock divisions relative to the external tempo. If you
enable MIDI Clock Receive, the
TEMPO control will have no effect.
Once you have accessed the external clock settings, you can enable the
following options:
• BUTTON 1:
MIDI Clock Transmit. When enabled (LED lit), MIDI clock
signals are transmitted.
• BUTTON 2:
MIDI Clock Receive. When enabled (LED lit), MIDI clock
signals are received. In addition, the Super Gemini will respond to MIDI
Start/Stop messages.
• BUTTON 3:
Reserved for future use.
Summary of Contents for SUPER GEMINI
Page 136: ......
