UDO Super Gemini — Owner’s Manual
27
CONNECTIONS
91
1. Headphone Outputs:
Connect a 6.35 mm or a 3.5 mm stereo
headphone jack to the respective outputs on the left front of the
instrument. The overall volume of the headphone output is controlled by
the
MASTER VOLUME
control.
To prevent the risk of fire and shock hazard,
do not remove chassis. No user servicable
parts inside. Refer servicing to qualified
personel. Do not expose this appliance to
rain or moisture.
CAUTION!
92
93
94
2. Power Switch:
Use this switch to power cycle the Super Gemini.
3. Power Connector:
The AC power connector accepts a standard,
grounded IEC power cord.
4. USB Port:
Connect the Super Gemini to your computer using the
included USB cable for bidirectional MIDI communication, performance,
patch, waveform and sequence file management, and firmware updates.
The Super Gemini does not require any drivers to interface with a
computer.
Do not connect a USB cable when using the MIDI DIN ports. The
Super Gemini does not support simultaneous DIN and USB MIDI.
Summary of Contents for SUPER GEMINI
Page 136: ......
