UDO Super Gemini — Owner’s Manual
98
GLOBAL SETTINGS
The global settings allow you to define how the Super Gemini behaves
and responds on a global level, i.e. regardless of individual performance
or patch settings. To access the global settings, simply press the
SHIFT
button. If you press
SHIFT
again, you exit the global settings.
Any changes applied to the global settings will be automatically
saved after a few seconds of no interaction with the instrument.
The global settings section.
MIDI CH:
Press this button to specify which base MIDI channel the Super
Gemini should respond to. The LEDs of buttons
1
-
8
and
A
-
H
indicate
which of the 16 available MIDI channels is currently selected. Press any of
the other 15 buttons to select a different MIDI channel.
The MIDI channel selected here is assigned to the upper layer, while
the MIDI channel one number above is assigned to the lower layer. For
example, if you set the base MIDI channel to 5, MIDI channel 5 is assigned
to the upper layer and MIDI channel 6 to the lower layer.
Do not connect a USB cable when using the MIDI DIN ports. The
Super Gemini does not support simultaneous DIN and USB MIDI.
TX/RX E:
Press this button to determine how parameter changes are sent
and received via MIDI. You can combine the following options:
• BUTTON 1:
MIDI CC Transmit. When enabled (LED lit), parameter
changes are transmitted as continuous controller messages.
• BUTTON 2:
MIDI CC Receive. When enabled (LED lit), parameter
changes are received as continuous controller messages.
• BUTTON 3:
NRPN mode. When enabled (LED lit), parameter changes
are transmitted as unregistered parameter number messages at a
resolution of 14 bits if MIDI CC Transmit is also enabled.
Summary of Contents for SUPER GEMINI
Page 136: ......
