UDO Super Gemini — Owner’s Manual
74
Octave Selector & Transpose Function
The Super Gemini’s octave selector toggle switch allows you to switch
octaves over a range of five octaves. The switch is spring-loaded, allowing
for expressive use when playing notes.
The currently selected octave is indicated by the lit LEDs above the toggle
switch, with
+2
being the highest octave and
-2
being the lowest.
The octave selector toggle switch.
Use the layer selector toggle switch next to the
PORTAMENTO
fader to
select the layer for which you would like to adjust the octave setting. You
have the choice between three options:
• BOTH:
Select this option if you want the same octave setting for both
layers. If you toggle to this position from either
UPPER
or
LOWER
, the
current setting for the upper layer is applied to both layers.
• LOWER:
Select this option if you want to adjust the octave setting for
the lower layer.
• UPPER:
Select this option if you want to adjust the octave setting for
the upper layer.
In shift mode, you can use the octave selector toggle switch to transpose
the pitch globally by +/- 12 semitones. If you transpose upwards, the two
LEDs on the right will start flashing. If you transpose downwards, the two
LEDs on the left will start flashing.
If you adjust the global transpose setting, the middle octave LED
will continue to flash even after exiting shift mode to indicate that
the default global tuning has been changed.
Summary of Contents for SUPER GEMINI
Page 136: ......
