UDO Super Gemini — Owner’s Manual
24
Comparing an Edited With a Stored Patch
Before saving a patch, it can be helpful to first ensure that you are not
overwriting a patch that you still have good use for.
To compare an edited with a stored patch:
1. In edit mode, press the numbered button (
1
-
8
) where you want to
store the edited patch.
If you want to select a patch from another bank, first select the
bank by pressing the respective button (
A
-
H
) once or twice. If you
want to select a patch from another group, select the desired group
by pressing the
PATCH
button either alone or in combination with
the
SHIFT
button before selecting a bank.
2. Press the same numbered button again to return to the patch you
just edited.
There’s More to It Than That: Shift Mode
The
SHIFT
button provides access to either shift mode parameters
such as the global settings (see pages 98-100) or secondary parameter
functions, labelled in inverse colours below the primary parameter names.
•
To switch to shift mode, press and release the
SHIFT
button. Its
LED will then start flashing to indicate you are in shift mode.
•
To temporarily access the secondary function of a patch-related
parameter (such as
DRIFT
,
PAN
, or
DECAY HOLD
), press and hold
the
SHIFT
button while moving the corresponding control. In this
case, shift mode is exited when the
SHIFT
button is released.
The shift mode button.
Summary of Contents for SUPER GEMINI
Page 136: ......
