UDO Super Gemini — Owner’s Manual
109
Setting up the Super Gemini as a MIDI Device in
a DAW
Follow the steps below to use your Super Gemini in conjunction with a
DAW:
1. Connect the Super Gemini to the MIDI ports of your audio interface
(in case your audio interface is equipped with MIDI ports) or the
USB port of your computer.
2. Once the Super Gemini is connected to your MIDI equipped audio
interface or your computer, make sure your DAW is sending and
receiving the MIDI data you would like the Super Gemini to receive
and send via the MIDI ports of your audio interface or the USB
port of your computer. Note that if you have connected the Super
Gemini via its MIDI ports, you cannot directly select the Super
Gemini as a MIDI device, only the audio or MIDI interface that the
Super Gemini is connected to.
3. Make sure all devices are set to the correct MIDI channel.
4. Set the global parameter
LOCAL to ‘off’ to avoid any MIDI data
loops during recording and playback.
Summary of Contents for SUPER GEMINI
Page 136: ......
