UDO Super Gemini — Owner’s Manual
32
Loading Alternative Waveforms for DDS 1
To load alternative waveforms for DDS 1, make sure you are in wave
mode, which is accessed by pressing the button labelled
WAVE
or by
moving the DDS 1 waveform rotary switch to the rightmost position.
The wave mode button.
Notice how the
WAVE
button label is surrounded by a box, which also
contains the names of the functions the select buttons
1
-
8
and
A
-
H
take
over in wave mode:
W1
to
W16
, which stands for waveform 1 to 16.
The waveform select buttons.
The alternative waveforms are organised in two groups of 16 waveforms
each, giving you access to a total of 32 alternative waveforms. You can
choose which channel (
A
or
B
) to assign one of these waveforms to by
pressing the
WAVE
button.
After selecting a channel, you can use each of the select buttons (
W1
-
W16
) to load two alternative waveforms:
W1
and
W17
,
W2
and
W18
, etc.
For example, toggling between alternative waveforms 8 and 24 is achieved
by repeatedly pressing button
W8
.
When you load a waveform from the first group of 16 waveforms (1-16),
the corresponding LED lights up. If you load a waveform from the second
group of 16 waveforms (17-32), the LED will start flashing.
After loading an alternative waveform from the second group, you
remain in selection mode for that group until you load an alternative
waveform from the first group again, and vice versa.
Summary of Contents for SUPER GEMINI
Page 136: ......
