UDO Super Gemini — Owner’s Manual
99
To exit this parameter, press
TX/RX E
again.
When MIDI CC Receive is enabled, the Super Gemini will always
respond to both parameter changes sent in 7 and 14 bit resolution.
TX/RX P:
Press this button to determine whether program change
messages should be transmitted and received via MIDI. You can combine
the following options:
• BUTTON 1:
When enabled (LED lit), program change messages are
transmitted.
• BUTTON 2:
When enabled (LED lit), program change messages are
received.
To exit this parameter, press
TX/RX P
again.
DUMP:
Reserved for future use.
LOCAL: This button toggles Local Control on or off. Disabling Local
Control can be useful if you want to control external MIDI devices or avoid
MIDI data loops while recording in a DAW.
• ON:
When Local Control is on (LED lit), the Super Gemini’s front panel
controls and keyboard are connected to the internal sound engine.
• OFF: When Local Control is off (LED not lit), the Super Gemini’s front
panel controls and keyboard have no effect on its sound engine.
With Local Control disabled and MIDI CC Transmit and Receive
enabled, MIDI data is still transmitted through the MIDI outputs.
TUNE: Press this button to auto-tune the Super Gemini’s filters for
calibration purposes. The LEDs of Buttons
1
-
8
and
A
-
H
will indicate the
progress of the auto-tune process from left to right until 12 LEDs are lit. As
soon as the filter calibration is complete, the LEDs will turn off.
MPE:
Reserved for future use.
Summary of Contents for SUPER GEMINI
Page 136: ......
