UDO Super Gemini — Owner’s Manual
81
Keyboard
In the keyboard section you can set the mode of a performance.
The keyboard section.
SINGLE:
In single mode, only one layer with 20-voice polyphony is active.
In binaural mode, the number of voices is halved to ten voices. By default,
single mode is set to the upper layer. You can switch between layers by
using the select buttons in the layer section.
DUAL:
In dual mode, the upper and lower layers are stacked, with the
20 available voices split evenly between the two. If you activate binaural
mode for a layer, its respective voice-count will be reduced to five.
C4
C5
C6
C3
C7
C2
Dual mode.
SPLIT:
In split mode, the upper and lower layers are mapped either side
of a split point on the keyboard, with the 20 available voices split evenly
between the two. If a layer is set to binaural mode, it will be limited to five
voices. The upper layer is assigned to all keys above the designated split
point, while the lower layer is assigned to all keys below.
Hold
SPLIT and play a note to set the split point. The split point is the first
note of the upper layer. By default it is set to C4.
Summary of Contents for SUPER GEMINI
Page 136: ......
