Tvone C3-440, Manual

Page: 25 / 225

tvOne Introduction 17
Introduction
Shipping Carton
Your CORIOmatrix will arrive boxed with internal foam inserts for maximum
protection during shipping. You are encouraged to retain the box and all packing
material so the unit can be returned in the unlikely event that repairs should ever
become necessary.
Important Safety Instructions
The AC power cable furnished with the unit should conform to the type in use in your
country. Please compare the plug on your cable with the power socket where the unit
will be installed.
If you did not receive the correct cable, DO NOT attempt to modify it. Instead,
immediately contact your dealer or contact tvONE at the sales office nearest to your
geographic location and request the proper cable.
Installation should be made such that the system fans are not blocked by other
pieces of equipment, and such that they may not be accidentally touched by users.
Connecting the PC to the CORIOmatrix
The physical connection between PC and CORIOmatrix is the same as with previous
tvONE products. The CORIOmatrix can be connected to the PC through an Ethernet
network, or by a serial (RS-232) cable.
By default, a CORIOmatrix running up-to-date firmware will be set to accept a DHCP-
assigned IP address. If you do not know what this IP address is, use the
CORIOdiscover application to configure the unit.
If you prefer not to use Ethernet, you can connect using a serial cable and use a
third-party controller. (Crestron and AMX modules are available, or use a terminal
emulator.)
For more information on configuring the connection, see “ Configure Connection via Ethernet ”
on page 26 or “