TURFCO 85809 Operator'S Manual Download

Page: 75 / 80

PARTS LISTS

85809

Item Part

Description

Qty.

No. No.

665860

Decal, Widespin 1540 EC Stripe ...........................................................2

665833

Decal Sheet, Widespin 1540 EC (Includes Items 3 thru 7) .................1

Decal, Metering Gate, LIGHTSPREAD/HEAVYSPREAD ...............1

Decal, LIGHTSPREAD/HEAVYSPREAD Instruction ......................1

Decal, Spinner Assembly Hydraulic Hose Routing ...... SEE NOTE A

Decal, Spinner Tilt Angle .................................................................1

Decal, Diverter Gauge .....................................................................1

665845

Decal Sheet, 85809 Logos (Includes Items 9 thru 11)

Decal, WIDESPIN Logo ..................................................................2

Decal, TURFCO Logo, 10” ..............................................................1

Decal, TURFCO Logo, 7-1/2” ..........................................................1

12 665804

Decal Sheet, 85808 and 85809, Product ID

(Includes Items 13 thru 23)

Decal, “KEEP HANDS AWAY” Warning ...........................................2

Decal, Tire Pressure ........................................................................2

Decal, Hydraulic Fluid Type Identiﬁcation (ISO68) ..........................1

Decal, Read Manual ........................................................................1

Decal, High Heat Warning ...............................................................2

Decal, Hydraulic Pressure Hazard Warning ....................................1

Decal, Spinner, Thrown Objects Warning ........................................1

Decal, Maximum Tongue Weight Warning ......................................1

Decal, Maximum Angle of Operation Warning ................................1

Decal, Maximum Hopper Capacity and Load Weight Warning .......1

Decal, 85809 1540 EC Product Identiﬁcation Decal .......................1

24 665880

Manual, Operator’s and Parts List, 85809 WIDESPIN 1540 EC ...........1

NOTE A: This Decal Shows The Proper Re-routing Of The Hydraulic Hoses If The

Spinner Assembly Has Been Removed. The Decal Is Located On The Rear Of

The Frame And Is Only Visible When The Spinner Assembly Is Removed.

Decals

Summary of Contents for 85809

















































































Search results

Summary of Contents for 85809

Reviews:

Related manuals for 85809

Brands by name

Popular brands

TURFCO 85809, Operator'S Manual

Search results

Summary of Contents for 85809

Reviews:

Related manuals for 85809

Brands by name

Popular brands