33
4.3.3.
Power delay
The Power Delay allows the user to setting the delay time of power providing after device
rebooted.
Notice:
The high priority port should have low value for power delay.
4.3.3.1.
CLI Configuration
Node
Command
Description
enable
show poe power-delay
This command displays the PoE power delay
configurations.
enable
configure terminal
This command changes the node to configure
node.
configure interface IFNAME
This command enters the interface configure
node.
interface poe power-delay
(enable|disable)
This command
enables
/
disables
of the Power
Delay function for the specific port.
interface poe power-delay time <0-300> This command configures the delay time of the
Power Delay for the specific port.
configure interface range
gigabitethernet1/0/
PORTLISTS
This command enters the if-range configure
node.
if-range
poe power-delay
(enable|disable)
This command
enables
/
disables
of the Power
Delay function for the range of ports.
if-range
poe power-delay time <0-300> This command configures the delay time of the
Power Delay for the range of ports.
Summary of Contents for NGI-S08C2POE8
Page 1: ......
Page 22: ...22...
Page 138: ...138 Action Click Delete to remove a configured trap receiver station...
