29
4.3.1.2.
Web Configuration
Parameter
Description
PoE Configuration Settings
State
Selects
Enable
to enable the PoE function on the Switch.
Selects
Disable
to disable the PoE function on the Switch.
Total Power
Total PoE power budget of the device can be configured Max Power
Limit Range is 240 (W).
Total Power (P) = Current of adaptor (I) * Voltage of adaptor (V)
Port
Select a port or a range of ports which to configure loop detection.
State
Selects
Enable
to enable the PoE function on the specific port.
Selects
Disable
to disable the PoE function on the specific port.
LLDP Alloc
PoE Power is allocated by LLDP MED.
Priority
Selects
Critical / High / Low
priority for the specific port.
Max Power Limit
Interface wise PoE power budget can be configured with respect to
requirement Maximum Power Limit Range is 30W.
Summary of Contents for NGI-S08C2POE8
Page 1: ......
Page 22: ...22...
Page 138: ...138 Action Click Delete to remove a configured trap receiver station...
