Tripp Lite NGI-S08C2POE8, Owner'S Manual

Page: 133 / 157

133
stp-topology-change
(disable/enable)
stp-topology-change trap.
configure snmp trap-event
traffic-monitor
(disable/enable)
This command enables/disables thetraffic-monitor
trap.
8.1.3.2. Web Configuration
Parameter Description
Trap Event Settings
Select all Enables all of trap events.
Deselect All Disables all of trap events.
Alarm-Over-Heat
Trap when system’s temperature is too high.
Alarm-Over-Load
Trap when system is over load.
Alarm-Power-Fail Trap when system power is over voltage/under voltage/RPS over
voltage/RPS under voltage.
BPDU-Guard
Trap when port is blocked by BPDU Guard/BDPU Root
Guard/BPDU port state changed.
Loop-Detection
Trap when port is blocked by Loop Detection.
Port-Admin-State-
Change
Trap when port is enabled/disable by administrator.
Port-Link-Change
Trap when port is link up/down change.
STP-Topology-Cha
nge
Trap when the STP topology change.
Traffic-Monitor
Trap when port is blocked by Traffic Monitor.