97
6.1.2.
Port Configuration
6.1.2.1.
CLI Configuration
Node
Command
Description
enable
show dot1x port
PORTLISTS
This command displays the current 802.1x
configurations for the specific port.
enable
configure terminal
This command changes the node to configure node.
configure interface IFNAME
This command enters the interface configure node.
interface dot1x
admin-control-direction
(both|in)
This command configures the control direction for
blocking packets.
interface dot1x authentication
(disable|enable)
This command enables/disables the 802.1x on the
port.
interface dot1x default
This command sets the port configuration to default
settings.
interface dot1x guest-vlan
(disable|enable)
This command configures the 802.1x state on the port.
interface dot1x max-req <1-10> This command sets the max-req times of a port.
(1~10).
interface dot1x port-control
(auto | force-authorized
| force-unauthorized)
This command configures the port control mode on
the port.
interface dot1x reauthentication
(disable|enable)
This command enables/disables re-authentication on
the port.
interface dot1x timeout
(quiet-period|
server-timeout|
reauth-period|
supp-timeout) VALUE
This command configures the
quiet-period
/
server-timeout
/
re-auth-period
/
supp-timeout
value
on the port.
Summary of Contents for NGI-S08C2POE8
Page 1: ......
Page 22: ...22...
Page 138: ...138 Action Click Delete to remove a configured trap receiver station...
