Tripp Lite NGI-S08C2POE8, Owner'S Manual

Page: 31 / 157

31
Reboot : Cut off the power of the PoE port, make PD rebooted.
4.3.2.1. CLI Configuration
Node Command Description
enable show pd-alive This command displays the configuration of the PD
Alive Check.
enable configure terminal This command changes the node to configure node.
configure pd-alive (disable|enable) This command disables or enables the global PD
Alive Check for the Switch.
configure interface IFNAME This command enters the interface configure node.
interface pd-alive (disable|enable) This command disables or enables the PD Alive
Check for the specific port.
interface pd-alive action
(reboot|alarm|all|none)
This command configures the action when the system
detects that the host cannot respond the keep-a-live
probe packet.
interface pd-alive interval
<10-120>
This command configures the interval to send the
keep-a-live probe packets to check if the host is still
alive for the specific port.
interface pd-alive ip IP_ADDR This command configures the Host IP address which
connects to the specific port.
interface pd-alive retry-time
<1-5>
This command configures the retry times when no
response from the host for the keep-a-live probe
packet for the specific port.
interface pd-alive power-off-time
<3-120> startup-time
<30-600>
This command configures the power-off time and
startup time.