Tripp Lite NGI-S08C2POE8, Owner'S Manual

Page: 32 / 157

32
4.3.2.2. Web Configuration
Parameter Description
PD Alive Check Settings
State Enables/Disables the global PD Alive Check.
Port Selects a port or a range of ports which you want to configure.
State Enables/Disables the PD Alive Check for the specific port(s).
IP Address
Specifies the Host IP address which connects to the port.
Interval
The interval to send the packet probes to check if the host is still
alive.
Retry Time
The retry times when no response from the host for the keep-a-live
probe packet.
Action
The action to the Power Device when the system detects that the
Power Device cannot respond the keep-a-live probe packet. The
options have Reboot / Alarm / All / None .
Power Off Time
When PD has been rebooted, the PoE port restored power after the
Power Off Time.
Start Up Time
The Switch waits the Start Up Time to do PoE Auto Checking when
the PD is rebooting.
Apply
Click
Apply
to take effect the settings.
Refresh
Click Refresh to begin configuring this screen afresh.