Tripp Lite NGI-S08C2POE8, Owner'S Manual

Page: 52 / 157

52
4.5.1.2. ERPS Instance
4.5.1.2.1. CLI Configuration
Node Command Description
enable show erps instance This command displays all of the ERPS instance
configurations.
enable show erps instance
<1-2>
This command displays the specific ERPS instance
configurations.
enable configure terminal This command changes the node to configure node.
configure erps instance This command enters the instance configure node.
config-erps
-inst
instance <1-2>
control-vlan <1-4094>
data-vlan
VLANLISTS
This command configures a new instance and
specifies its control VLAN and data VLANs.
config-erps
-inst
no instance <1-2> This command removes an instance.
config-erps
-inst
show This command displays all of the instance
configurations.
4.5.1.2.2. Web Configuration
Parameter Description
Instance Settings
Instance
Configures the instance ID. The valid value is from 1 to 31.
Control VLAN
Configures the control VLAN for the instance. The valid value
is from 1 to 4094.
Data VLAN
Configures the data VLAN for the instance. The valid value is
from 1 to 4094. It can be one or multiple VLANs.
Apply Click Apply to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.
Instance Status