124
7.4.
Port Utilization
This feature helps users to monitor the ports’ traffic utilization, to display the link up ports’
traffic utilization only.
7.4.1.
CLI Configuration
Node
Command
Description
enable
show port-utilization
<bps|Kbps|Mbps>
This command displays the link up ports’ traffic
utilization.
Example:
L2SWITCH#show port-utilization bps
Port Speed Rx Utilization(%) Rx Utilization(bps) Tx Utilization(%) Tx Utilization(bps)
---- ----- ----------------- ------------------- ----------------- -------------------
8 1000 0.00 7301 0.00 1570
L2SWITCH#show port-utilization Kbps
Port Speed Rx Utilization(%) Rx Utilization(Kbps) Tx Utilization(%) Tx Utilization(Kbps)
---- ----- ----------------- -------------------- ----------------- --------------------
8 1000 0.00 8 0.00 0
L2SWITCH#show port-utilization Mbps
Port Speed Rx Utilization(%) Rx Utilization(Mbps) Tx Utilization(%) Tx Utilization(Mbps)
---- ----- ----------------- -------------------- ----------------- --------------------
8 1000 0.00 0 0.00 0
7.4.2.
Web Configuration
Parameter Description
Port Utilization
Unit
The field selects the unit for the RX/TX utilization.
Apply
Click
Apply
to take effect the settings.
Refresh
Click
Refresh
to begin configuring this screen afresh.
Port
The field displays the port ID.
Speed
The field displays the port’s speed.
Rx Utilization (%)
The field display Rx utilization in percentage.
Summary of Contents for NGI-S08C2POE8
Page 1: ......
Page 22: ...22...
Page 138: ...138 Action Click Delete to remove a configured trap receiver station...