Tripp Lite NGI-S08C2POE8, Owner'S Manual, Page: 122 / 157

122
7.2.2. Web Configuration
Parameter Description
Port Mirror Settings
State
Select option to enable / disable the port mirroring feature on the
Switch globally.
Monitor to Port Select the port which connects to a network traffic analyzer.
All Ports
Settings in this field apply to all ports.
Use this field only if you want to make some settings the same for
all ports.
Use this field first to set the common settings and then make
adjustments on a port-by-port basis.
Source Port Selects a port to monitor packets received and transmit or both.
Monitor Mode
Select a port to monitor as destination for the source port.
Select Ingress, Egress or Both to only copy the ingress (incoming),
egress (outgoing) or both (incoming and outgoing) traffic from the
specified source ports to the monitor port. Select Disable to not
copy any traffic from the specified source ports to the monitor
port.
Apply Click Apply to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.