Triple-IN
GmbH
© Triple-In GmbH • 27/01/2016 11:07:00
PSxxx-20 Laser Scanner User's Manual
30
30
30
30
The first serial interface, internally connected with the Measurement board
(MPU), is used to program the TCP/IP connection parameters and to update the
Measurement board firmware. This interface supports the so-called Terminal
Mode (see chapter "Terminal Mode"). After startup displays the terminal the
sensor's serial number, IP address and self-test results.
Picture 26: TeraTerm with Measurement Board startup message
The second serial interface is connected with the communication board and is
used for Ethernet firmware updates only (see chapter "Firmware updates"). It
displays the current Ethernet board firmware version and a connection status.