Triple-IN
GmbH
© Triple-In GmbH • 27/01/2016 11:07:00
PSxxx-20 Laser Scanner User's Manual
52
52
52
52
9.2
Self-test messages and System Health status
PS Range Modules perform a self-test at startup and checks various hardware
components. All LED are blinking during the self-test.
The result of the self-test is reported on the RS232 of the MPU board.
PS Range Module
[PS Firmware; 03.xx.xx; 2016-01-20; (c) Triple-IN GmbH 2015]
SN: 1234
Local IP: 10.0.1.234 1024
Gateway IP: 10.0.10.0:1025
- Running self-test ...
- Warning [see below]
- Error [see below]
The Terminal mode provides the function “Show system health status”.
______________________________________________________________________________
Terminal Mode
______________________________________________________________________________
1 - Show user parameter
2 - Show system health status
3 - Show reference tables...
4 - Restore to factory settings
E - Edit parameter
S - Take a scan
L - Switch laser marker
0 - Exit to Run Mode
> 2
System health & Self-test bits;
______________________________________________________________________________
Bit ; Result ; Error ;
______________________________________________________________________________
0 ; OK ; - Warning: Self-test not completed.
1 ; OK ; - Scan buffer is empty.
2 ; disabled ;
3 ; disabled ; - Error: Switching output failure!
4 ; disabled ; - Error: Digital input failure!
5 ; disabled ; - Error: External incremental encoder failure!
6 ; OK ; - Error: Check motor!
