Triple-IN
GmbH
© Triple-In GmbH • 27/01/2016 11:07:00
PSxxx-20 Laser Scanner User's Manual
26
26
26
26
7
Setting into Operation
7.1
Windows Software Tools
7.1.1
Windows Program TeraTerm for the RS232 Serial Interface
TeraTerm is a very suitable program for the so-called Terminal Mode of the PS
Laser Scanner. TeraTerm is a free software terminal emulator (serial
communication program) for MS-Windows.
The program is available on Triple-IN’s webserver. Any other terminal program will
be suitable as well.
1.
Download TeraTerm from Triple-IN’s FTP-Server.
2.
Run the TeraTerm program installer.
3.
Connect the EDM via a RS232 connection, using either a generic COM port or
an USB-to-serial adapter.
4.
Open TeraTerm and navigate to "
Setup > Serial port...
"
5.
Choose the correct COM port.
6.
Set the baud rate to 115200, 8 data bits, no parity, 1 stop bit, no flow control.
7.
Close the setup dialog.
8.
If you want to store these settings for future use, go to "Setup > Save setup…"
9.
Navigate to the TeraTerm installation directory and store the setup in
TERATERM.INI.
