Triple-IN
GmbH
© Triple-In GmbH • 27/01/2016 11:07:00
PSxxx-20 Laser Scanner User's Manual
16
16
16
16
Pin
Pin
Pin
Pin
Signal
Signal
Signal
Signal
Comment
Comment
Comment
Comment
Direction
Direction
Direction
Direction
J11-1
STD_TXD
RS232 TxD Measurement Board
Output
J11-2
STD_RXD
RS 232 RxD Measurement Board
Input
J11-3
SWI1
Switch 1
Output
J11-4
SWI2
Switch 2
Output
J11-5
ORX
RS 232 RxD Ethernet Board
Input
J11-6
OTX
RS 232 TxD Ethernet Board
Output
J11-7
nSTEP
Reserved for future use
Do not connect
J11-8
nDIR
Reserved for future use
Do not connect
J11-9
485A
Reserved for future use
Do not connect
J11-10
485B
Reserved for future use
Do not connect
J11-11
CH_A
Reserved for future use
Do not connect
J11-12
CH_B
Reserved for future use
Do not connect
J11-13
CH_I
Reserved for future use
Do not connect
J11-14
5V_IB
Reserved for future use
Do not connect
J11-15
GND
5 Volt Ground
RS232, SW1, SW2
J11-19
24V DC+
Positive supply voltage
Input
J11-20
DC-
Negative supply voltage
Input
5.3
Interface Adapter to use Triple-IN Standard
Cables
5.3.1
About the Interface Adapter
The interface adapter allows the usage of Triple-IN standard cables that were
originally designed for PSxxx-90 Laser Scanners. The adapter connects the 20 pin
header socket with serial interfaces, the local network, and includes Power over
Ethernet.
•
The brown lead goes to pin 1.
•
The RJ45 of the adaptor board must be connected with the RJ45 connector
on the red Olimex Board.
Picture 13 PS Range Module Interface Adapter
