Epic 3000
Programmer’s Guide
Programming Codes
100-14362
Rev A
Page 45
Feed to Black Dot
An option for the EPIC 3000 is a black dot sensor. This command is supported by a
feed to black dot command.
Function
Feed to Black Dot
ASCII
[ESC][VT]<n>
Hexadecimal
!BH,0BH,<n>
Decimal
<27><11><n>
IPCL
None
EPOS
[GS][VT]<n>
Where n
<n> is the number of inches to feed while looking for the black marker.
Description
The [ESC][VT] command performs feeds the paper until the black dot is
positioned for cut.
The EPIC 3000 keeps track of the location of the black dot and will feed paper
until the black dot is positioned so as to allow the auto cutter to cut within the black dot.
