T480
Extended Printer Control
T480
Programmer’s Guide
Page
232
Rev A
100-14362
LinkFont4 = TactGB18030.ccc
;From 1 to 99 fonts may be defined
Font1 = TactMOD.ttf
Font2 = TactWGL_M.ttf
Font3 = TactGB18030.ccc
Font4 = TactOCR.ttf
Font5 = TactWGL_V.ttf
;The brush size effects only stroke fonts.
Brush = 100
[legacy]
;EmulationMode = Font,Horizontal,Vertical,Width.
; Where:
; If Font = 0 Use Linkfont else 1-4 above.
; If Font is 100 or greater use BMFont (Font - 100). BMFonts only used
Width.
; Horizontal and Vertical are in 8th points, Width in Dots.
; See the Programmers guide for more information.
Epson1 = 0,56,72,10
Epson2 = 0,64,72,14
Epson3 = 0,50,60,8
PcOS1 = 0,56,72,10
PcOS2 = 0,64,72,14
PcOS3 = 0,80,80,18
PcOS4 = 0,80,80,20
PcOSOCR = 4,80,80,20
BarC1 = 0,56,72,10
BarC2 = 0,64,72,14
BarC3 = 0,50,60,8
; Up to 8 user defined fonts may be defined.
USRFont1 = 100,9,24,10
USRFont2 = 101,12,24,13
USRFont3 = 4,56,72,0
USRFont4 = 4,64,72,0
[gtech]
;Add custom GTECH Prams here
;Pram0 = Pram0Return
[bmfont]
;There may be up to 8 bitmap fonts.
;Bitmap fonts are fixed sizes and have no options
BMFont0 = chr10x24.bft
BMFont1 = chr13x24.bft
BMFont2 = chr15x24.bft
BMFont3 = ocr16x24.bft
[usb]
;USB Driver
;Usbclass may be 255, 7, GSA, 108 ...
;Default is class 7 (Printer device)
Usbclass = 7
;;UsbSpeed may be 0 for Full or 1 for High
Usbspeed = 1
;USB Plug and Play Print driver. 1 = PnP Active.
;USB_PnP = 1
[options]
; to remove white space set Linespace to 0
