T480 Unicode and Fonts
T480
Programmer’s Guide
Page
214
Rev A
100-14362
Function
Set minimum Line Spacing in ¼ Points
All
ASCII
[ESC] + v <d>
Hexadecimal
1BH 2BH 76H
Decimal
<27> <43> <118>
Range
d = 0, 16
– 255
The [ESC] + v command will set the line spacing in ¼ points, where ¼ point is defined as
1/288
th
of an inch.
ASCII
[ESC] + v <d>
Hexadecimal
1BH 2BH 76H
Decimal
<27> <43> <118>
Range
d = 0, 16
– 255
If d = 0 variable spacing is selected.
NOTE:
This is the minimum spacing. If the character height setting
requires a larger spacing, the character height will override this setting.
Function
Set stroke font brush size.
All
ASCII
[ESC] + B <w>
Hexadecimal
1BH 2BH 42H
Decimal
<27> <43> <66>
Range
w = 0, 6
– 200
Description
The [ESC] + B command will set brush stroke percentage for stroke fonts.
If the brush size is set to zero the font design stroke width will be used.
Values from 6 to 200 represent 0.4 to 12% of the em-width of the font. The default for
most fonts is about 3%. The EPIC 3000 using the GB18030 font supplied by TransAct
Technologies produces the best characters with a brush size of about 100.
Note:
The default value for the Brush stroke may be set in the POR.INI
file.
