Epic 3000
Programmer’s Guide
Programming Codes
100-14362
Rev A
Page 151
Code 49 Print Options
Function Code 49 Options
ASCII
[ESC] [EM] 4 <f> <v>
Hexadecimal
1BH 19H 34H <f> <v>
Decimal
<27> <25> <52><f> <v>
IPCL
None
Description
This command alters the way Code49 barcodes are generated and
printed.
Where
f = Feature to control and v = the value of the feature.
f = W 57H, 87D
Set the minimum element width.
v = 1-10, 3 is the default.
A width of 1 may be unreadable.
It the barcode will not fit in the print zone, the
printer will automatically reduce the width until the
barcode will fit. If the barcode will not fit at a width
of 1, the printer will not print the barcode.
f = H, 48H, 72D
Blank Space between the barcode and the HRI
Default 8
f = G, 47H, 71D
GS1 Mode. (See General description above)
By default Databar barcodes use GS1 formatting.
f = P, 50H, 80D
HRI Position
f =0
– Off, f = 1 - Top, f =2 - Bottom, f =3 - Both
f = F, 46H, 70D
HRI Font
f = 0 Medium, f=1 Larger, f- 2 Smaller (Note: Fonts
may be redefined by using the change legacy font
command.)
