Programming Codes
T480
Programmer’s Guide
Page
168
Rev A
100-14362
Bit
On/Off
Hexadecimal
Decimal
Function
0
Off
00H
<0>
Paper roll near-end sensor disabled
On
01H
<1>
Paper roll near-end sensor enabled
1
Off
00H
<0>
Paper roll near-end sensor disabled
On
02H
<2>
Paper roll near-end sensor enabled
2
Off
00H
<0>
Paper roll end sensor disabled
On
04H
<4>
Paper roll end sensor enabled
3
Off
00H
<0>
Paper roll end sensor disabled
On
08H
<8>
Paper roll end sensor enabled
4-7
-
-
-
Undefined
Table 14 Paper
Sensor Commands
NOTE: Paper low is not supported by the EPIC 3000
[ESC] y
Set control feature commands
ASCII
[ESC] y <n>
Hexadecimal
1BH 79H <n>
Decimal
<27> <121> <n>
IPCL
&%Y0-9 or &%YX <m
1
> <m
2
> <m
3
> (for numbers greater than nine)
EPOS
[ESC] y <n>
Where n
0
Reinitializes the printer and forces Citizen mode
1
Reinitializes the printer and forces Star mode
2
Reinitializes the printer and forces EPIC 3000 mode
3
Reinitializes the printer and forces extended EPOS mode
4
Disables IPCL commands
5
Enables IPCL commands
6
Disables inquire processing (All preprocessing is disabled.)
7
Enables inquire processing
8
Enables extended diagnostics
9
Print Current Configuration
10
Not used
11
Not used
12
Not used
13
Not used
14
Not used
15
Print Current totals
16
Not used
17
Requests the printer to enter remote Standby. (See page 238)
18
Requests the printer to exit remote Standby.
20
Print alignment settings
21
Force Off Line Mode to Normal operation
22
Force Off Line Mode to Buffer full only.
34
Reinitializes the printer and forces Model 50 mode
35
Reinitializes the printer and forces Microline mode
48
Force Microline status to False
49
Force Microline status to True
78
Reset all character attributes to disabled
87
Force the printer into Windows mode. (203x203 and No Wrap)
