TRADEDOR TD55DM, Installation Manual

Page: 3 / 40

Tradedor TD55DM & TD55SEL Installation Guide
10 11 12 13 7 15 14
2 1 3 4 5 6 7 8 9 1
Diagram 1
Door Overview
Please check all components for
any visible damage, if there is
any please contact your supplier.
1 Head Plate
2 Guides
3 Full Box
4 Tube End
5 Barrel
6 Security Straps
7 Curtain
8 Motor
9 Motor Plate
10 Guide Rail
11 Plastics Caps
12 End Lock
13 Base Rail
14 Remote Control Fob
15 Switches (if any)
2
Equipment Required
• 2 x Step ladders or hop ups
• Spirit level
• Tape measure
• Power drill
• 10mm A/F Spanner
• 2 x Pozi-screwdrivers
• 7mm Metal drill bit
• 10mm Metal drill bit
• 7mm Masonry drill bit
• Hacksaw
• Small electrical screwdriver
• 4mm A/F Allen key
Tradedor Component Checklist
• Door Curtain.
• Barrel Assembly (Barrel, Tube End, Security Springs,
Security Collars).
• Head Plate with Motor Attached.
• Head Plate.
• One Pair of Guide Runners.
• Control System with Two Remote Fobs.
• Fixings Kit (Qty 10: 5 x 50 screws 7mm brown rawl
plugs, plastic caps and Qty 1 plastic adjustment wand).
Please note: fixings supplied work on the majority of
materials but if you know that you require specialised
fixing please replace with these.
Checklist & Components