TRADEDOR TD55DM, Installation Manual

Page: 29 / 40

Tradedor TD55DM & TD55SEL Installation Guide
1 Lift the back case to offer up into place and mark
for winding stem and if needed the wire gland
(fig.13.1) .
2 Take down and place on a flat surface (fig.13.2) ,
then cut out the slots needed (fig.13.3) .
3 Clean up any loose or rough edges (fig.13.4) .
4 Lift the back case up as close to the winding stem
and gland as possible, hook the back case into the
top lip where the two cases meet
(fig.13.5) and slide
across to go all the way to the edge of the header
plate, making sure when it is all the way over that
the whole of the two cases are slotted together.
5 With the self-tapping screw provided, secure
through the back case into the bottom flange
of the header plate on both sides
(fig.13.6) .
fig.13.3
fig.13.6
fig.11.5
fig.13.1
fig.13.2
Completed
fig.13.4
28
13. Installation Of Back Case