TRADEDOR TD55DM, Installation Manual

Page: 4 / 40

Tradedor TD55DM & TD55SEL Installation Guide
These fitting instructions are for guidance only, you should always assess your garage construction
for installation as each garage & opening has its own specific needs. Please read these instructions
carefully and in full before commencing the installation of the roller garage door.
3
IMPORTANT SAFETY
INSTRUCTIONS
The RD55 Econ must be installed
and operated in accordance with the
instructions supplied; failure to do
so could result in damage to your
door and compromise your safety.
WARNING AND GUIDANCE NOTES
1 At least TWO people are required to install this product.
2 Prior to installing please remove all rings, watches and
sharp objects to avoid any possibility of damage.
3 Prior to installing please remove any items of loose
clothing to avoid any risk of entanglement or injury.
4 Your door comes complete with a 3 pin plug as
standard (this is supplied and must be fitted with
a 13amp fuse) which should be plugged straight
into a 13amp 3 pin switched socket in the vicinity
of your door, should you need any extra electrical
work. This must be carried out by a suitably qualified
person, if you have any doubts please consult an
electrician.
5 Your receiver box should be installed in a location that
is at a comfortable height to operate the push buttons,
but out of the easy reach of children.
6 Please do not allow children to operate the push
buttons or remote control fobs, as serious injury can
occur from misuse.
7 Warning: you must have a clear line of sight of the
whole of your roller garage door when the door is
in operation. Failure to do so may result in harm to
persons or damage to your roller garage door.
Warning & Guidance