TRADEDOR TD55DM, Installation Manual

Page: 35 / 40

Tradedor TD55DM & TD55SEL Installation Guide
1 Mark the height you require your external
override to go through the wall and drill a 22mm
hole through the wall all the way.
2 Place the plastic tube into the hole from the front
with the plate flush against the outside wall and
mark the 4 holes for fixing the plate.
3 Then go inside and mark the length to cut off the
plastic insert.
4 Remove from the wall, drill 4 fixings outside and
cut plastic tube to size then reinsert in wall.
5 Insert universal joint at bottom of shaft into the
plastic tube end and mark 2 fixing holes.
6 Mark the length you need to cut the shaft to
make fit with stem.
7 Cut shaft to size and drill a 5mm hole in the shaft
so you can reapply clip to attach shaft to stem.
8 Drill fixing holes for universal joint.
9 Attach shaft to stem with clip and place
universal joint into plastic tube and screw
to wall.
10 Remove lock and check to make sure the
unit turns.
fig.15.1
34
External Manual Override