TRADEDOR TD55DM, Installation Manual

Page: 15 / 40

Tradedor TD55DM & TD55SEL Installation Guide
Direction Of Rotation
(SAFETY EDGE)
1 Press and hold the top open button on the receiver board (fig.8.5) . This is located at the bottom
right corner of the yellow transformer and the barrel should start turning in the upwards direction.
Should the barrel be turning in the down direction, swap motor wires black to U and brown to V.
2 Press and hold the top open button on the receiver board to check.
fig.8.5
fig.8.4
7 Before plugging in, check to make sure that there
are no bare cables touching and all wires are
securely fixed.
8 There is a four dipswitch block at the bottom
middle of the receiver board (usually blue or red).
Slide dipswitch 2 into the up position
(fig.8.5) .
14